CTIO Staff Responsibilities
1. Blanco Observing Run Support
2. Responsible Staff Members
3. Special Responsibilities
4. Support on Tololo
5. List of staff member per section
5.1 Scientific Staff Telescopes & Instruments Responsibilities
5.2. Subsytem Experts
5.3. CTIO Technical Support for observations
5.4. Telescope Mechanics & Electronics
The first line of support is the Observer Support crew on Cerro Tololo. This team includes Observer Support, Floater Assistant Observer and Night Assistant, who are conversant with procedures in general, and remove the need for the observer to be familar with details of operating the telescope, guiders, etc. Observer support should also be the first to consult in the event of problems or questions.
The Support Scientist are responsible for introducing the observer to the instrument and monitoring progress of the run. See section Scientific Staff Telescopes & Instruments Responsibilities
Support Scientists are assigned to instruments as follows:
|Blanco Telescope||Tim Abbottfirstname.lastname@example.org|
Visitors are encouraged to contact the support scientist for their instrument if they have special concerns about its operations or observing practices. Any anticipated issues should be mentioned in the run preparation form, filled out well in advance of the run. The support scientists will monitor these forms for issues that might require their attention.
Depending on the complexity of the instrument and the prior experience of the visiting observer, the support scientist may assist with the startup at the beginning of the night. First night assistance by the support scientist should be arranged before the run. Otherwise, the support scientist will be available on an on-demand basis and should be contacted by the visiting observer as needed.
Staff scientists who have responsibities for particular Blanco instruments are listed above. They can be consulted for general questions about the CTIO facilities (e.g. when preparing an observing proposal), however after a proposal is scheduled your first choice of contact should be the staff contact. If need be the latter will pass your question on to the relevant scientific or technical expert.
Some members of our La Serena Engineering and Technical Services (ETS) division are experts in sub-systems that observers will meet on Tololo. Here is a short list.
The Telescopes Operations Division (TelOps) is responsible for operating and maintaining the telescopes on Cerro Tololo and SOAR on Cerro Pachón. TelOps is divided into three sections, these are the Observing Support section which is responsible for preparing operating the telescopes at night time. This team is backed up by the Telescope Mechanics and Telescope Electronics sections.
Specific members of the Electronics Section are appointed to be responsible for various instruments and systems. Although they will not always be on Tololo when the instrument is scheduled, they are often present for installation and engineering runs, and are familar with the instrument status, spares situation, and documentation.
If there is an instrument or telescope problem the night assistant will call the relevant people to assist. On the 4-m this call-out can occur at any time of the night, but on the smaller telescopes there is a middle-of-the-night cut-off. Almost all problems can be fixed by the Tololo support team (some take longer than others...), at times in consultation with specialists based in La Serena. We understand that your telescope time is important to you, please be patient while problems are resolved.
If there is a telescope or instrument failure at the Blanco telescope lasting more than one hour it is mandatory to call the Support Scientist mentioned above (no matter what the time of night). It is the TELESCOPE OPERATOR'S responsibility to make this call.
29 July 2020 (SDP)
|Blanco 4-m Telescope||Tim Abbott||tim.abbottATnoirlab.edu|
|SOAR 4-m Telescope||César Briceño||cesar.bricenoATnoirlab.edu|
|SMARTS Consortium||Todd Henry||thenryATchara.gsu.edu|
|SOAR 4-M INSTRUMENTS|
|Goodman Optical Spectrograph||Sean Points||sean.pointsATnoirlab.edu|
|SOAR Optical Imager (SOI)||Sean Points||sean.pointsATnoirlab.edu|
|SOAR Adaptive Optics Module (SAM)||César Briceño||cesar.bricenoATnoirlab.edu|
|Spartan IR imager||Jay Elias||Jonathan.EliasATnoirlab.edu|
|TripleSpec 4.1||Sean Points||sean.pointsATnoirlab.edu|
|BLANCO 4-M INSTRUMENTS|
|Dark Energy Camera (DECam)||Alistair Walker||alistair.walkerATnoirlab.edu|
|CCDTV Cameras||Peter Moore|
|CCD software||Marco Bonati|
|Telops Manager||Esteban Parkes|
|Observer Support||Hernan Tirado
|Floater Assistant Observer||Rodrigo Hernández
|Nigh Assistant||Claudio Aguilera
Electronics and mechanics staff at Cerro Tololo, Blanco Telescope.